Please contact me via email ben@wargamescenics.com for interest in ordering.
Online shopping carts order are being suspended due to moving location and manufacturing changes that are limiting time to make and molded model availability.
Quantities available may be subject to change without notice.
Terms for sale are prepaid via PayPal. Shipping costs are additional and will be calculated with your order. All models will be bulk packaged and do not have individual retail packaging. There is no minimum order.
Orders requests via email will be notified for model availability and estimated shipping time, PayPal invoices will be sent when ready to ship.
Any discrepancies between quantity ordered and quantity available will be credited back to the purchaser's PayPal account.
All models are supplied unpainted, except for the Desert Fort.
Pre-orders
can be taken for the next batch, Select the Alamo image for more pictures and information.
|
|
After much hard work and capital investment, the Alamo model is back. A truly unique and impressive piece, the Alamo comes with 15 separate sections. These can be assembled together to form a historically accurate replica of the Alamo at the time of the famous battle. The different pieces can also be used as stand alone scenic parts or assembled in different configurations for a variety of tabletop wargames. Assembled as the Alamo, the complete scenic model has an overall size of 48" by 60". The re-released model has some added features. We took advantage of the re-tooling effort to add some missing details and improve the model. The facade of the chapel is now a cast resin insert which captures and holds the fine molded detail much better than using just high density foam. This part must be fitted and glued in by the hobbyist, but we believe you will agree that the added detail is worth it. In addition, all of the molded foam part bottoms have been hand sanded flat so that the entire model assembly sits flat and goes together better right out of the box. Of course, the model is still essentially a kit that the hobbyist will need to sand, putty, and paint a bit to get the final version. But that's half the fun, right? |
|
Alamo Chapel Model |
Don't have room for the whole Alamo? Other Alamo sections are also
available, or can be ordered upon request. |
||
|
This model comes with four modular sections that can be rearranged to form a square castle or long wall. The basic castle can be expanded later with the optional damaged wall and expansion wall sets. The tower tops are removable. The set also includes a cast pewter gate. Each castle wall section is 13" long. The overall size of the assembled square castle layout is 16" by 16" by 7.25" tall. | ||
The model comes primed grey, shown here in the natural beige foam color for contrast. |
This model consists of
six separate pieces that can be rearranged to form different castle
layouts or a long wall. It includes a gatehouse with a working cast
pewter drawbridge and separate gangway piece. The tower, great hall,
and stable tops are removable. The overall size of the layout shown is
30" long by 16" wide by 7.25" tall. This models does come pre-primed in
gray latex primer. |
||
The hoarding kits are laser cut from 1/8" birch plywood. The roof parts and tower spacers are molded from the same rigid polyurethane foam as the castle parts. Tower hoarding kits fit any of the wall section models or Watchtower model. The standard wall hoarding will fit any of the wall sections except as noted below. The correct wall hoarding to order is shown next to the associate wall section. | The castle sections are pre-primed with a gray latex paint. Pictures showing the models in the natural amber-brown polyurethane molding material, or that have been painted, are shown only for reference. | Hoarding Kit Assembly Directions Link |
|
Wall and Tower Hoarding Kits are purchased separately. |
The castle hoardings add historical dimension to the castle models and make it much more playable for miniature wargaming. The wall hoarding allows 30 figures to man a wall and 14 figures to occupy a tower top. The hording have been designed to accommodate most 25 and 28 mm figures with up to 20mm unit basing. | ||
Castle
Hoarding Kits are
Laser Cut to order.
Please allow 2-3 weeks for shipping. |
|||
Includes the standard wall with stair and wall with building sections as shown below. |
This model set consists of two castle wall sections. These are the same standard castle wall sections that come with the deluxe six section castle model. One section has a stairway leading to the ramparts on the inside wall and one section has a small shed on the inside wall. Each section is modular and will fit together with any of the other 25mm Hudson & Allen castle wall models. The tower tops are removable. The overall size of each sections is approximately 14" long by 5" wide by 7.25" tall. These are the same wall sections that come with the deluxe castle. |
||
The Sally Port Wall is the same gate sections that comes with the standard castel and includes a pewter gate and poticullis. | |||
This
model consists of one castle wall section. This section is modular and
will fit together with any of the other 25mm Hudson & Allen
castle wall models. The tower top is removable. The overall size of the
section is approximately 14" long by 5" wide by 7.25" tall.
|
|||
This model consists of one castle wall section. This section is modular and will fit together with any of the other 25mm Hudson & Allen castle wall models. The tower top is removable. The overall size of the section is approximately 14" long by 5" wide by 7.25" tall. | |||
|
This castle sections does
come lightly pre-primed with a gray latex paint. Pictures showing the
model in the natural amber-brown polyurethane molding material, or that
have been painted, are shown only for reference. |
||
|
Comes with all these parts and a pewter drawbridge. |
||
|
|
||
Comes
with the laser cut parts, and a molded foam roof and tower top spacer. |
|||
|
Damaged
Castle Wall Expansion Set $65.00 This
model set consists of two castle wall sections. One breached wall and
one partially collapsed tower. Each section is modular and will fit
together with any of the other 25mm Hudson & Allen castle wall
models. The tower tops are removable. The overall size of each sections
is approximately 14" long by 5" wide by 7.25" tall.
These castle sections do
come lightly pre-primed with a gray latex paint. Pictures showing the
models in the natural amber-brown polyurethane molding material, or
that have been painted, are shown only for reference. . |
||
|
These
conical tower top pieces fit over the standard 25mm Hudson &
Allen castle wall tower or crenelated tower top models. Give your
H&A castle some character and a custom appearance by added some
conical roofs to your model.
|
||
|
The tower extension fits the standard 25mm Hudson & Allen castle wall tower and watchtower models. Give your H&A castle some character and a custom appearance by added some extension sections to your model. | ||
Basic
Medieval Tower Keep $52.00 |
|||
This is a stand-alone scenic model. The tower tops and second story
section are removable. A plastic scale ladder is included. Two interchangeable roof types come with the model as well. They are a crenelated tower top and conical roof cap. The assembled model's overall size is 7.0" by 7.0" by 12" tall. |
|||
Quantities are limited and subject to change as these are made in small batches. Pre-orders can be taken for the next batch if they are out of stock at the time of order. |
The model is sold painted, in a basic highlighted adobe color fi |
This
model consists of four wall sections that can be assembled together to
form a square fort or long wall. Each fort wall section is 14" long.
The overall size of the assembled square fort is 18" by 18" 5.25". It
does not include a gate.
|
|
|
This fortified farm model has been out of production from Hudson & Allen for about 7 years. Vatican Enterprises, in cooperation with Hudson & Allen, has re-mastered the original model with an expansion to increase the size of the farm house area and added an entirely new second story for the farm house. The revised fortified farm model is now back in limited production through Vatican Enterprises |
This is a stand-alone scenic model. The fortified farm model is supplied in a amber colored polyurethane foam material (shown in the photos) and needs to be primed and painted to make a finished model. This model comes with three molded foam parts. A farm base, a stable roof, and a removable second story for the farm house. Only the lower floor of the farm house area has a detailed interior. The upper story and the barn portion are solid pieces. The assembled model's overall size is 16.5" by 10.0" by 5.75" tall. |
|
New! Late Medieval Inn $65.00 This
is a stand-alone scenic model modified from the European Village model
below. This model is just the Inn portion of the
village. A large stable (or first floor storage) door has
been added on one end of the Inn. |
|||
Vatican Enterprises' Scenic Models
Siege Tower Kits are Laser Cut to order. Please allow 2-3 weeks for shipping. |
|||
Laser cut Scale
Cowhides
(set of four different profiles) Made from Chamois leather. |
Laser
Cut Siege Tower Kit.
Four figures on 20mm bases fit accross the battlement. Can be
used for 25 or 28mm figures. An entire unit of 20 to 40 can fit inside.
The size is approximately 3.5" wide x 5" long x 8.5" tall.
The height to the lowered assault bridge is 4.75".
Specifically designed to use with the H&A castles,
but can be used with any similar scaled fortification wall.
The model rolls and has a functional assault bridge
with metal chain and plastic ladders between the levels. The
model is precision cut from birch plwood and veneer and includes 80 of
the laser cut cowhides to cover the front. The model shown
above is unpainted and can be used as assembled if you want your siege
tower to have that newly assembled look. SIEGE TOWER ASSEMBLY DIRECTIONS
(draft copy so far)
|
||
Alien
Breastwork Formations
These are each 3" in diameter with a space in the middle where a standard 20mm figure base can stand. As they are circular, several of these can be arranged next to each other to form a defensive line of alien looking obsticles. |
Sci-Fi Alien Breastworks Alien
Breastwork Crystal Formation #1 |
The Following Items are Temporarily Out of Production
In order to improve long term product availability and ensure continued quality of their molded products, Hudson & Allen is currently in the process of upgrading their models, molds, and manufacturing. Unfortunately, this means that some patterns will be temporarily out of production while they are being reworked. Those items that are in stock and available along with those items that are temporarily out of production are noted below.
Please contact us if you have any specific product questions or would like to be placed on a list and notified when a particular model is returned to production.
Medieval Manor House $70.00 This is a stand-alone
scenic model. |
Out of
Production
Expected Re-Release TBD |
Please
select images for more detailed pictures